I just joined forum and searched for the above error. I see plenty folks have reported the problem here, and many more on Google as well. But, there is no solution to date. Looks like there is an issue between Visual Micro and Atmel Studio. Has anyone been able to resolve the problem please? Following is the final part of the file I get with my run of Blink program. It runs fine when I use the Arduino IDE directly. But, never with VM running through Atmel Studio 6.1 or 6.2. I tried all Baud rates if that was the problem, but to no avail.
Thank you.
__________________________________________
Binary sketch size: 1,084 bytes (used 3% of a 32,256 byte maximum) (0.90 secs)
Uploading to I/O board using 'Arduino as ISP'
Uploader started for board Arduino Uno
Uploader sometimes uses programmer name: arduinoisp
Uploader will attempt to use programmer name: arduinoisp
C:\Program Files\Arduino\hardware\tools\avr\bin\avrdude -C"C:\Program Files\Arduino\hardware/tools/avr/etc/avrdude.conf" -v -v -v -v -patmega328p -cstk500v1 -P\\.\COM3 -b19200 Blink_alarm.hex":i
avrdude: Version 5.11, compiled on Sep 2 2011 at 19:38:36
Copyright (c) 2000-2005 Brian Dean,
http://www.bdmicro.com/ Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "C:\Program Files\Arduino\hardware/tools/avr/etc/avrdude.conf"
Using Port : \\.\COM3
Using Programmer : stk500v1
Overriding Baud Rate : 19200
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Recv:
avrdude: stk500_getsync(): not in sync: resp=0x00
avrdude done. Thank you.