Nov 15th, 2024 at 12:35pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › Missing Due? (6.2 with 1.6.4 )
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Missing Due? (6.2 with 1.6.4 ) (Read 4221 times)
Vaclav
Junior Member
**
Offline


Posts: 81
Joined: Dec 28th, 2013
Missing Due? (6.2 with 1.6.4 )
Jun 12th, 2015 at 4:45pm
Print Post  
Returning user and just installed the latest Visual micro.
( On Atmel Studio 6.2 ) 
Works as expected with Uno, however there is no Due option in Boards menu. 
My Due works fine using just Arduino IDE.
Google did not provide a clue what I missed, it used to work with 1.6.0 IDE.
PS I do get an pull down box allowing for Due programming port, but no Due board to select so I guess the Due is identified somehow. Confused.

Any help will be appreciated as always.
  
Back to top
 
IP Logged
 
Vaclav
Junior Member
**
Offline


Posts: 81
Joined: Dec 28th, 2013
SOLVED Missing Due? (6.2 with 1.6.4 )
Reply #1 - Jun 12th, 2015 at 5:05pm
Print Post  
Never mind, found it. 
I guess my older version of 1.6.4 did not have "Board manager".
Just wandering if Arduino folks publish SAME release updates.
Cheers
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12163
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Missing Due? (6.2 with 1.6.4 )
Reply #2 - Jun 12th, 2015 at 5:35pm
Print Post  
Hi,

Visual Micro follows the Arduino release updates. Arduino 1.6.2 included the boards manager and Visual Micro produced a similar Board manager a few weeks later.

Not sure which one you used but should both work the same way.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Vaclav
Junior Member
**
Offline


Posts: 81
Joined: Dec 28th, 2013
Re: Missing Due? (6.2 with 1.6.4 )
Reply #3 - Jun 12th, 2015 at 5:54pm
Print Post  
Hello Tim,
as a  historical note.
When I switched to Due I used 1.6.0. and than 1.6.4 November something. There were never any need to use Board (manager) to have access to Due both on Arduino IDE and ATmel Studio. The latest 1.6.4.does have "Board Manager" and Due is NOT part of the default load.
Make sense, less clutter.
In same cluteress spirit, I wonder if I can uninstall all  and keep just Due. 
Cheers Vaclav
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12163
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Missing Due? (6.2 with 1.6.4 )
Reply #4 - Jun 12th, 2015 at 6:11pm
Print Post  
Hi,

There is some confusion. Arduino 1.6.2 was only released this year, February I think.

When you say uninstall and just keep Due do you mean how do you remove the AVR boards from the list?

If so then you can probably just delete the arduinoide\hardware\arduino\avr folder.

It's confusing because SAM is still installed with the ide yet SAM must be downloaded.

On Monday they release the Arduino Zero and 1.6.5. I expect there will be a new downloadable option for SAMD.

It's fun at the moment. Sort of!

  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.