Nov 15th, 2024 at 1:40pm (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › How to install Visual Studio 2015 after installing Atmel Studio 7
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Hot Topic (More than 8 Replies) How to install Visual Studio 2015 after installing Atmel Studio 7 (Read 9478 times)
Davide70
Newbies
*
Offline


Posts: 5
Joined: Feb 25th, 2016
How to install Visual Studio 2015 after installing Atmel Studio 7
Feb 25th, 2016 at 10:25am
Print Post  
Hi, 
I used visual micro successfully on Atmel Studio 6.2 up to November 2015.
Now after almost 3 months of break I tried to use it for a new project but on Atmel Studio 6.2 did not exist anymore visual micro.
I tried to reinstall it by downloading the latest version.
I purchased a new license because the old license said it was already used or something like it!
But now I can not compile the software and when I press Build in Atmel Studio, this long message appears:

Quote:
System.IO.FileNotFoundException: Could not load file or assembly 'Atmel.Studio.Services.Interfaces, Version=7.0.0.0, Culture=neutral, PublicKeyToken=d264112969646cc9' or one of its dependencies. Impossibile trovare il file specificato.
File name: 'Atmel.Studio.Services.Interfaces, Version=7.0.0.0, Culture=neutral, PublicKeyToken=d264112969646cc9'
   at Visual.Micro.Visual.Studio.Arduino.AddInApp.CompileDo(Project oProject, Boolean IsDebugStartCommand)
   at Visual.Micro.Visual.Studio.Arduino.AddInApp.OnBeforeCommandEvent(String sGuid, Int32 ID, Object CustomIn, Object CustomOut, Boolean& CancelDefault)

WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].



I tried to install Visual Studio 7.0 but visual micro is not visualized in Tools or some other place.

please someone can help me?

Thanks

Davide
« Last Edit: Mar 1st, 2016 at 11:55am by Tim@Visual Micro »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12163
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Build fails with strange message
Reply #1 - Feb 25th, 2016 at 12:22pm
Print Post  
Hi,

Thanks for the info. If you have a license key issue then please email visualmicro.com, no need to buy another license.

Atmel 7 and Visual Studio 2015 do not support the older addin system that AS6.2 supports.

There is an updated version of visual micro for AS7 available from the downloads page on visualmicro.com. However I recommend installing Visual Studio 2015 Community instead. 

AS7 is very buggy at the moment and Visual Studio 2015 community is free and stable. + The last release of visual micro is not available for AS7 yet and supports Arduino 1.6.7 and below.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Davide70
Newbies
*
Offline


Posts: 5
Joined: Feb 25th, 2016
Re: Build fails with strange message
Reply #2 - Feb 25th, 2016 at 3:05pm
Print Post  
Hi Tim, 
thanks for your ansewer.
I already wrote to visualmicro.com as you suggest me, and your answer was:
Quote:
Hello David,

Thanks for the email.

I am sure it will be easy for us to help you understand this problem.

Please create a thread in our forum so that I can help you.

Regards,

Tim Leek 


so this is an infinite loop. Smiley 
For me is perfect to be able to use visual micro and atmel studio 6 2 as last year but something not works! 
I prefer not install visual studio it need too much space. 

I'll try to uninstall all and install old visual micro version atmel studio 6.2 but where i can find it? 
thanks 
Davide
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12163
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Build fails with strange message
Reply #3 - Feb 25th, 2016 at 3:10pm
Print Post  
Hi David,

Sales/license renewal or transfer need to be handled via email.

Product usage and tech support via the forum.

You have two separate unrelated questions which is why you have two answers Smiley

Install and general usage is unaffected by license discussion. Plus if you had visual micro uinstalled then you had a problem it would have been easier to handle with you in the forum prior to your attempting to uninstall and reinstall any software.

I think the initial problem was you were using an older version of visual micro in free mode. That is was not activated. It would expire unless a key was used. I would have reset your key had you emailed it because it sounds like you used it once some time ago, then reinstalled or changed user, so the key was needed again.
« Last Edit: Feb 25th, 2016 at 3:13pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Davide70
Newbies
*
Offline


Posts: 5
Joined: Feb 25th, 2016
Re: Build fails with strange message
Reply #4 - Feb 26th, 2016 at 12:25pm
Print Post  
Good morning,
excuse me for my inexperience, I understand that licensing issues are to be disccussi via email, sorry.

I think I understand why visualmicro addins were no longer in Atmel Studio 6.2.
This winter, with the help of my friend, I changed my little home server. This change has brought a change of admin resulting in the loss of all settings of my programs.

Now the problem is that after installing the latest version of VM, I can not make it work with Atmel Studio 6.2 and also with Atmel Studio 7.0

Now I'll try to make other attempts, maybe I communicate by email my license numbers to verify them.

thank you
David
  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12163
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Build fails with strange message
Reply #5 - Feb 26th, 2016 at 4:26pm
Print Post  
Hi,

Thanks very much for the info. The license issue will not affect the install so lets get that working first.

You should certainly stay away from atmel 7.0 it is a nightmare to support at the moment and visual micro for atmel will probably be discontinued if they don't put some more effort into it very soon.

When you install atmel studio (6 or 7) it first installs visual studio and then installs atmel studio over the top. So Visual studio is a  simpler and cleaner install. During the past year or so Microsoft have made Visual Studio free when previously it was expensive. The cost of VS was the only reason for supporting atmel studio (which does not support as many "arduino" boards as visual studio)

I can find you an older install of visual micro but I strongly recommend installing Visual Studio 2015 Community making sure you click "Custom Install" and select the C++ options. 

VS2015 gives you an infinitely better ide. You will understand how VS 2015 works because it is quite similar to Atmel studio.

The versions of Visual Micro for AS6.2 and VS2015 are different. Both can be installed without affecting each other. Both share the same Visual Micro license system.
  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Davide70
Newbies
*
Offline


Posts: 5
Joined: Feb 25th, 2016
Re: Build fails with strange message
Reply #6 - Feb 29th, 2016 at 8:46am
Print Post  
Thank you very much for your advice.
unfortunately I'm living a nightmare, because when I try to install visual studio 2015 appears a fatal error.

I do not know how to do.
I'll try to ask help from a few friends to see if they solve the problem. I hope!  Smiley

thank you
  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12163
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Build fails with strange message
Reply #7 - Feb 29th, 2016 at 11:08pm
Print Post  
Hi

Problem installing Visual Studio 2015?

You should first use control panel to uninstall atmel studio 7.0 and also the "Visual Studio 2015 Shell" that atmel installs.

Then install Visual Studio 2015 Community

I hope that fixes it for you.
« Last Edit: Feb 29th, 2016 at 11:09pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Davide70
Newbies
*
Offline


Posts: 5
Joined: Feb 25th, 2016
Re: How to install Visual Studio 2015 after installing Atmel Studio 7
Reply #8 - Mar 1st, 2016 at 7:19am
Print Post  
Hi,
thank you very much, today I'll try
best regards.
Davide
« Last Edit: Mar 1st, 2016 at 11:55am by Tim@Visual Micro »  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.