Nov 13th, 2024 at 7:17am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › › › Programming Arduino Zero (SOLVED - used programmer by mistake)
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Programming Arduino Zero (SOLVED - used programmer by mistake) (Read 4267 times)
Paolo66
Junior Member
**
Offline


Posts: 10
Joined: Oct 6th, 2013
Programming Arduino Zero (SOLVED - used programmer by mistake)
Mar 4th, 2016 at 4:39pm
Print Post  
Hello, 
I'm able to program an Arduino Zero using Visual Micro and VisualStudio 2015, option choosen 
- Arduino1,6
- Programming using Programming/debug port
- Using every time the programmer for upload
- Programmer ATMEL EDBG
But at the end the little program (BLINK) doesn't run.
If I try to reprogram ArduinoZero with normal ArduinoSuite the program capability doesn't work anymore.

I need to reburn the bootloader with ArduinoSuite to restablish all capabilities.

It is obvious that if I try a program download with visual micro the film restarts Sad

I would precise that programming an old MEGA all is ok both in Visual Micro and Arduino suite.

Thanks in advance for any help
Paolo
« Last Edit: Mar 6th, 2016 at 1:26pm by Tim@Visual Micro »  
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12163
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Programming Arduino Zero
Reply #1 - Mar 4th, 2016 at 6:05pm
Print Post  
Hi,

I think there is a missing scene in the film Smiley

The arduino.cc Zero board is different to the arduino.org M0 and I think you will have the same problem if you use arduino 1.6 to upload to the M0.

In Visual Micro you can configure the Arduino.org Ide location alongside the Arduino 1.6 ide. Currently, in Visual Micro, the Arduino.org ide is labeled "Arduino.org 1.7". 

After you configure the .org ide location, when you want a project to use the M0 from Arduino.org, select the Zero from the Arduino.org boards list on the toolbar or "Visual Micro" menu.

« Last Edit: Mar 4th, 2016 at 6:06pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Paolo66
Junior Member
**
Offline


Posts: 10
Joined: Oct 6th, 2013
Re: Programming Arduino Zero
Reply #2 - Mar 5th, 2016 at 10:16am
Print Post  
I'm using an Arduino.cc Zero Board instead the M0 from Arduino.org.
May be I understood wrong but .cc and .ord IDE are for board respectively from the two different vendors.

So, please, could explain me better ?

Thanks a lot Smiley
  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12163
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Programming Arduino Zero
Reply #3 - Mar 5th, 2016 at 3:09pm
Print Post  
Maybe I misunderstood what you mean by "ArduinoSuite" which is a term normally used for the arduino.org board

Arduino.org and arduino.cc are two different vendors. The board you have uses arduino 1.6

> Please confirm that you do not have "always use programmer for upload" ticked? 

NOTE: You are probably not using the programmer upload in arduino 1.6. To use programmer in arduino 1.6 you will use "Sketch>Upload using programmer". Is this what you do to upload?

Thanks
« Last Edit: Mar 5th, 2016 at 3:09pm by Tim@Visual Micro »  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Paolo66
Junior Member
**
Offline


Posts: 10
Joined: Oct 6th, 2013
Re: Programming Arduino Zero
Reply #4 - Mar 5th, 2016 at 8:31pm
Print Post  
With Visual Micro on VIsualStudio2015 I confirm you that I program every time with "always ..", please look at image.
Without this tick the upload fails every time (I'll post a message with details)

Using the Arduino.cc toolchain (1.6.7), the system work well using simply the compile & upload icon , se secon on the top left to be clear.
I didn't tried to use the "upload using programmer", it isn't a checkable opt, so I ignored it in the past.
Anyway, with Arduino,cc toolchain I didn't see issue.
Thanks
Paolo

  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Paolo66
Junior Member
**
Offline


Posts: 10
Joined: Oct 6th, 2013
SOLVED Programming Arduino Zero
Reply #5 - Mar 5th, 2016 at 8:42pm
Print Post  
Hello, I unticked the "Always use ...", I'm sorry but it WORK WELL ALL.
My apologies, seriously !
Bu I don't understand way before I wasn't able to upload.
In any case I still contnue to use VisualMicro and I'll update you 

THANKS I dont'have better word.

Cheesy Paolo
« Last Edit: Mar 5th, 2016 at 8:43pm by Paolo66 »  
Back to top
 
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.