Sep 19th, 2024 at 11:32am (UTC)
 
 

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

  • Enabled vMicro > Compiler > Show Build Properties
  • Re-Compile your program with these settings enabled
  		Save the new Output to a Text File and....
  • Click the Reply button and attach as .txt file OR
  • Click here to Email us with the file attached, and a link to your post
Support requests without the output above may be impossible to answer, so please help us to help you
 
  VS Arduino › Visual Micro › Installation & Troubleshooting › Unable to select HID device for Teensy 3.2
‹ Previous Topic | Next Topic ›
Page Index Toggle Pages: 1 Send TopicPrint
Normal Topic Unable to select HID device for Teensy 3.2 (Read 874 times)
JamesP
Newbies
*
Offline


Posts: 2
Location: Plesanton, CA USA
Joined: Oct 24th, 2019
Unable to select HID device for Teensy 3.2
Oct 24th, 2019 at 6:31am
Print Post  
Hi,
I am using VS2019 and VM with TeensyDuino for XPlane flight simulator. I have to set serial type as "Flightsim" which turns it into a HID device and it does not show in the port dropdown. Is there a way to connect to a HID serial port? Works fine in Arduino IDE.

Thank you,
James
  
Back to top
 
IP Logged
 
JamesP
Newbies
*
Offline


Posts: 2
Location: Plesanton, CA USA
Joined: Oct 24th, 2019
Re: Unable to select HID device for Teensy 3.2
Reply #1 - Nov 14th, 2019 at 12:54am
Print Post  
Hello,

I purchased Visual Micro a few weeks back for $99. I have a support question regarding com ports. Where do I go to get my paid for support? 


Issue:
I use Visual Micro to program the Teensy 3.2 within VS2019. I use TeensyDuino which can be found here: 

https://www.pjrc.com/teensy/td_download.html

For the Teensy programming port I use the USB type "USB  Flight Sim”. This turns it into a USB Serial device and DOES NOT show up in the Visual Micro port dropdown.

How do I set up Visual Micro in order to see my Teensy so I can upload to it?

This works fine in the default Arduino IDE.

Thank you,
James 

Purchased October 29, 2019
  
Please Register or Login to the Forum to see File Attachments
Back to top
 
IP Logged
 
Tim@Visual Micro
Administrator
*****
Offline


Posts: 12136
Location: United Kingdom
Joined: Apr 10th, 2010
Re: Unable to select HID device for Teensy 3.2
Reply #2 - Nov 14th, 2019 at 1:40pm
Print Post  
Ah sorry we missed this.

You are trying to use a Virtual COM port which the arduino ide does not support directly. When you installed Teensy for Arduino it overwrote some Arduino IDE sources so that it can allow its Virtual Serial ports to work.

Visual Micro does not yet support Virtual COM ports but it is high up on our list and hopefully available shortly.  Maybe over the next few weeks/month.



  
Back to top
WWWFacebookTwitterYouTube  
IP Logged
 
Page Index Toggle Pages: 1
Send TopicPrint
‹ Previous Topic | Next Topic ›
 
  « Board Index ‹ Board Top  

VS Arduino » Powered by YaBB 2.6.12!
YaBB Forum Software © 2000-2024. All Rights Reserved.