VS Arduino - Debugger for STM32 / ESP32 from germany

Nov 5^th, 2024 at 3:44am (UTC)

Before logging an issue, please update to the latest release of Visual Micro from the Downloads Page.

When Logging a Support Issue in the Forum, please ensure you have also:-

Save the new Output to a Text File and....

Support requests without the output above may be impossible to answer, so please help us to help you

‹ Previous Topic | Next Topic ›

Pages: 1

Debugger for STM32 / ESP32 from germany (Read 5046 times)

dominik Newbies Offline Posts: 5 Joined: Dec 24^th, 2012	Debugger for STM32 / ESP32 from germany Apr 19^th, 2021 at 11:57am	Print Post
	Hi all, I need to do some projects on STM32 and ESP32. Is there any recommended hardware debugger available in germany? Thx for your advice Dominik
	« Last Edit: Apr 19^th, 2021 at 11:57am by dominik »

	IP Logged

Simon@Visual Micro Administrator Offline Posts: 2426 Joined: Feb 13^th, 2019	Re: Debugger for STM32 / ESP32 from germany Reply #1 - Apr 19^th, 2021 at 12:02pm	Print Post
	From our Debugger Support Listing the below devices will work on both boards: (assuming you want to use the same debugger on both devices) F2232 MiniModule F2232H Dual RS232 Segger J-Link I do not know of any reason these would not be available in Germany at present.


	WWW Facebook Twitter YouTube IP Logged

dominik Newbies Offline Posts: 5 Joined: Dec 24^th, 2012	Re: Debugger for STM32 / ESP32 from germany Reply #2 - Apr 19^th, 2021 at 12:13pm	Print Post
	Hi Simon, thx. https://de.elv.com/elv-highspeed-mini-usb-modul-um-ft2232h-komplettbausatz-09934... Can anyone confirm that this module will work as Debugger? Dominik
	« Last Edit: Apr 19^th, 2021 at 12:14pm by dominik »

	IP Logged

Simon@Visual Micro Administrator Offline Posts: 2426 Joined: Feb 13^th, 2019	Re: Debugger for STM32 / ESP32 from germany Reply #3 - Apr 19^th, 2021 at 12:40pm	Print Post
	That looks compatible as it uses the same FT2232-H Chip, and expect it will be the same as using the "F2232H Dual RS232" options in Visual Micro, and the same hardware connections. If there are issues when you set it up let us know, and I would recommend starting with the ESP32 (if you have it) for debugging, then once working move onto the STM32. ESP32 Hardware Debugging Docs FT2232 Dual Wiring Diagram


	WWW Facebook Twitter YouTube IP Logged

EdinLipka1 Newbies Offline Posts: 1 Joined: May 14^th, 2021	Re: Debugger for STM32 / ESP32 from germany Reply #4 - May 17^th, 2021 at 8:12am	Print Post
	Hi....In the event that I saw accurately, it upholds USB/Serial programming + correspondence, and furthermore JTAG investigating right? What's more, the two things can be associated simultaneously? At the connection I posted before, kindly glance at areas 3.2.3 and 3.2.4, do you have anything like those circuits? order pcb
	« Last Edit: Jun 25^th, 2021 at 9:59pm by EdinLipka1 »

	IP Logged

Simon@Visual Micro Administrator Offline Posts: 2426 Joined: Feb 13^th, 2019	Re: Debugger for STM32 / ESP32 from germany Reply #5 - May 17^th, 2021 at 12:59pm	Print Post
	The FT2232 Modules support JTAG debugging, and the Serial can also be routed through this as well (as the ESP-PROG does this using the same chip on-board). Reviewing how the ESP32-PROG works (https://www.espressif.com/sites/default/files/documentation/ESP-Prog_reference_d...) The Arduino RX goes to FT2232H BD0, and Arduino TX goes to FT2232H BD1, which should be labelled on your board or mappable from the standard Mini Module Data Sheet below: https://ftdichip.com/wp-content/uploads/2020/07/DS_FT2232H_Mini_Module.pdf If this is not the correct section or document, please re-post the direct link to the document again.


	WWW Facebook Twitter YouTube IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›